top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

OUR SERVICES

Oil-Fired Boilers

We carry a large stock of oil boiler spare parts to get your heat back on. We install, service and repair oil boilers. A comprehensive boiler service, carried out by our experienced and fully trained engineer, covers every working part of the system including:

  • Oil tank check

  • Filters clean

  • combustion chamber clean

  • Baffle plates clean

  • Heat exchanger clean *

  • Heat exchanger seal check *

  • Condensate drain check *

  • Condensate trap flushed & refilled *

  • Nozzle replaced

  • Motor capacitor check

  • Fire valve check

  • Ventilation check

  • Flue check

  • Oil pressure check

  • Smoke test

  • Combustion tests with electronic analyser

   *   if required

General Plumbing

We are happy to carry out the following jobs: 

  • Cisterns replaced

  • Ball valves repaired/replaced

  • Hot water cylinders replaced

  • Unvented cylinders fitted

  • Radiators replaced/fitted

  • Thermostatic valves fitted

  • Time clocks/programmers fitted

  • Thermostatic showers serviced

  • Electric showers replaced

  • Taps repaired/replaced

  • Toilet cisterns

Gas Boilers

We carry out a full range of  services in relation to gas boilers including boiler installation, boiler servicing, and landlord safety certificates. All work is carried out by our fully trained, Gas Safe Registered technician.

Gas boiler service: Manufacturer's instructions are normally followed but a service should involve the following: 

  • Burners and injectors clean

  • Heat exchanger  clean

  • Fan clean and checked for wear/damage

  • Check/replace case seal

  • Check tube between fan and pressure switch

  • Heat input/ operating pressure checked

  • Controls and safety devices checked

  • Combustion analysis - Co/Co2 ratio

Landlord Safety Checks: ​All appliances provided by a landlord must be checked at least once a year. These checks should include:

  • Burner pressure/ gas rate

  • Safety device check

  • Spillage test

  • Ventilation check

  • Flue termination

  • Condition of seals

Certificate copy provided for landlord and tenant.​

Powerflushing

Some of the most common problems in heating systems such as boiler noise, pump failure and cold spots on radiators could be prevented with effective cleaning and treatment. Chemical treatment is well worth considering as a dirty heating system can potentially increase a fuel bill by up to 35% and lead to a poorly functioning system and higher Co2 emissions. The solution to this is to have your system powerflushed. The powerflushing machine is attached to the heating pipes and cleaning chemicals are added to break down the black sludge. Using vibration and reversing the flow will remove any stubborn deposits. Each radiator is cleaned in turn until they are free of any dirt. After the powerflushing is complete, a corrosion inhibitor is added to stop any further sludge build up in the future, and this should ideally be topped up annually. If you are changing your boiler, getting the system powerflushed should be a priority.

Wood/Multi-Fuel Stoves

Wood burning/multi-fuel stoves have become very popular and it is important to make sure yours is running safely! When installing these stoves, a special assessment of ventilation/flue requirements is required to ensure they function safely and efficiently. Our fully trained engineer will assess your needs and talk through your options.

bottom of page